PRODUCTS WE DEAL IN
Our Products.......
PRODUCTS WE DEAL IN
Address : 6/42, Vallabh Nagar Pimpri,
Pune : 411 018. (Maharashtra, India)
Tel. No: +91-20-27421605, 32549579. Fax : +91-20-27425172.
Mobile : +91-98222 57366, E-Mail : binex@eth.net, binexcontrols@vsnl.net
L.E.D. FLASHERS
These flashers when given supply will continuously flash
with a 1 sec delay. Apt for control panel applications like "TRIP",
"HIGH" & "LOW" Indications. In case of PLC's we can
save one of its output if it is being used for flashing of a lamp. This output
can then be optimally used elsewhere for better and more important applications.
L.E.D. BUZZER FLASHERS
Has the dual ability of FLASHING AND GIVING AN AUDIO
OUTPUT from a single unit. It is the only product of its kind, which gives
you both indications in just 22.5mmØ. Useful for end-of-operation applications,
Control desks and also where space is a constraint.
COMMON NOTE ON ALL ABOVE
ITEMS
1. The voltage range available are 6V,12V, 24V,110V,
240V, IN ac & dc and 440V in ac only.
2. Odd voltages can be manufactured for as minimum order quantity
of 50 nos
3. Colour Range Available Red, Yellow, Amber, Green, & Clear. Blue
available on request.
4. All lamps come with a one year replacement warranty
5. These lamps are also available with a fire retardant body (suitable
for the Chemical Industry).
6. L.E.D.'s used are of the Hewlett Packard make.
7. Cutout size of all above lamps is 22.5 mm Ø (item1 available in
16mm also).
The only hooter of its kind
which gives an audio output and has an visual indication and has a built-in
accept facility, thereby saving on the cost of a contactor or relay. It acts
as a single window annunciating system. Available in Single & Four tone
versions and can also be provided with potential free output terminals.
Cut -out sizes available
92 x 92mm & 138mm x 138mm Voltages: 12V, 24V in ac &dc, 110Vac, &
220Vac
68 x 68mm: Voltages: 24Vdc
These Hooters are also available in 22.5 Dia cut out.
LED BUS BAR INDICATIONS
:
LED Bus Bar Indicators is a direct replacement to the
25/60 W filament bulbs 220V AC (Pin Type Holder). Gives a very long life.
Extremely Low power consumption. Can be used on Over Head/EOT cranes/hoists
where replacement of bulbs is extremely difficult.
Also available in 22.5
Dia cut out panel
mounting type.
ANNUNCIATING WINDOWS
These are also L.E.D. based with a cut out size of 54.5
x 43mm. Can be used for replacement of existing windows and has a very long
life. Saves you the hassles of replacing bulbs all the time.
L.E.D. BULBS
( B A 9 S Base, Telephone
Bulb )
Many maintenance departments face the frequent problem
of replacing bulbs in the Indicating lamps and in annunciating windows, which
fail very often. Therefore to eliminate this problem we have developed a SOLID
STATE L.E.D. BULB. These bulbs can be directly used in place of the existing
filament bulb in the Indicating lamps. The 10mm/3mm (4 Nos) L.E.D fitted on
the BA9S CAP is available in Red, Green & Amber colours. These bulbs can
also be fitted with screw type base on request.
Say good-bye to the conventional bulb. No more stocking of bulbs, no more
indent raising and wastage of valuable time & paper.
